Electrical Panel Upgrades & Replacements

Electrical Panel Upgrades and Replacements

We look at your service size, the condition of the panel, and the new loads you want to add before we recommend a specific upgrade. We help you choose between a panel replacement, a new subpanel, or a full service change.

We check your current breaker space, grounding, meter base, and the service mast to see what your home can support. We'll tell you if you actually need a larger service or if we can add the circuit space you need with a subpanel. Our goal is to make sure your home stays powered safely through Palouse winters and spring downpours.

Request a Quote

A short description of the service request is enough to get started. Add photos or equipment details if you have them.

Service: Electrical Panel Upgrades and Replacements

Request a Quote →

Or call (509) 903-9411

Your panel sends power to every circuit in your home. If you notice the breakers trip often, see damage on the enclosure, or want to add a welder or a hot tub, we can look at the system for you. We don't just guess at the size: we check the actual demand to see if a larger service is the only answer for your project.

See service area →

Panel upgrade, replacement, subpanel, or service change?

Adding an EV charger, a heat pump, or a shop can change how much power you use. We help you find the right path based on your wiring and the loads you plan to run.

Panel ReplacementWe replace the panel if the enclosure is damaged or if the internal bus bars are in poor condition. We look at the brand and the space available before we suggest a new one.
Service Capacity UpgradesWe check your current amperage and the loads you want to add. We'll tell you if you need a larger service from the utility to keep your freezer and heater running without trips.
Subpanel InstallationWe install subpanels when you have plenty of service capacity but simply ran out of breaker positions. This adds the space you need for new projects without changing the main service.
Meter Base & Service MastWe check the meter base and the mast where power enters your home. If we have to change these, we coordinate the work with Avista or your local co-op.
Grounding and BondingWe look at your grounding rods and water pipe bonds to make sure they meet current safety codes. We'll tell you which corrections we need to make as part of the project.
Permits and InspectionWe handle the permit through the Idaho DOPL or Washington L&I. We'll explain the inspection steps to you before we start so you know when the power will be back on.

Signs your panel needs attention

If you notice these issues, have us look at the panel. We check the cause before we suggest a repair:

Breakers that trip oftenIf a breaker trips over and over, we check for a loose connection or a circuit that is simply carrying too many loads at once.
A panel that feels warm, buzzes, or smells burntHeat, unusual odors, or sizzling sounds are serious issues. Do not open the cover: call us and we'll tell you if we can work you in for a check.
Buzzing or cracklingWe listen for arcing or loose connections inside the enclosure. If you hear these sounds, stop using the affected appliances and have us check the breaker.
You still have a fuse boxWe check the condition and circuit loading of your old fuse panel. We'll tell you if it can still handle your modern appliances or if it's time for a change.
No open slotsIf your panel is full, we can often add a subpanel. We'll first check that your main service can handle the extra demand from the new circuits.
Federal Pacific or Zinsco panelsThese brands are widely documented for breakers that may fail to trip during a fault. If your home has one, we'll check how yours has held up and discuss the risks.

Need electrical panel upgrades and replacements?

Call Crescent or request a quote.

(509) 903-9411 Request a Quote

What goes into the cost of a panel upgrade

The price depends on whether we are replacing just the panel, adding a subpanel, or upgrading the whole service. We look at the meter condition, how much grounding work we have to do, and the permit path. Our panel cost guide shows current Palouse planning ranges to help you get started.

See 2026 Palouse panel cost estimates →

Electrical Panel Upgrades in Moscow, ID

For homes in Moscow, we pull the permit through the Idaho DOPL. If you live in the city core, Avista serves your home, while Clearwater Power serves our rural neighbors in Latah County. We handle the permit paperwork and coordinate the disconnect with your utility, and we'll confirm the full plan with you before the power goes off.

Area pages for electrical panel upgrades and replacements

Moscow and Pullman are the primary service-area pages. Explore nearby communities below, or call Crescent if you are not sure whether your property is in the service area.

Focused local pages

These pages address service-specific questions where location, panel capacity, equipment, wiring route, and the applicable requirement path affect the estimate.

What to expect from a Crescent estimate

Crescent reviews the existing equipment, requested installation or repair, access, and applicable permit or utility path before pricing it.

Clear written optionsThe estimate identifies the recommended installation or repair, reasonable alternatives, and what is included.
Upfront pricingPricing is presented before the installation or repair begins. Known conditions that could change the total are identified in writing.
Five-star service, no upsellingCrescent explains the options and recommends the repair, equipment, or capacity supported by the system and requested installation.
Installed equipment documentationThe estimate identifies the equipment being installed and the documentation or instructions that apply to the selected scope.
A defined arrival windowOnce an installation or repair is scheduled, Crescent provides a tight arrival window.
Mileage identified when it appliesTravel or mileage may affect estimates for outlying properties and is identified in writing when it applies.

Useful planning pages

These pages help compare options, identify likely scope drivers, and prepare for a straightforward conversation with Crescent.

Questions customers usually ask

How long will my power be off during a panel upgrade?

We schedule the utility disconnect and tell you the exact plan before we start the work. The time depends on the utility response and the inspection sequence.

Can you upgrade my panel without rewiring the whole house?

Yes. We check your existing circuits where they land in the new panel. We only perform targeted corrections if we find damaged or unsafe wiring.

Does a panel upgrade need a permit?

Yes. We handle the permits and inspections for you. We'll tell you which steps apply to your project before we begin.

What size panel do I need?

We'll tell you the right size after we look at your current service and the loads you want to add. A subpanel might be enough if you just need more breaker space.

How do I know if my older panel is unsafe?

We check the brand, model, and physical condition of the bus bars. If the panel feels warm or you smell something burnt, call us immediately and do not remove the cover.

How much does a panel upgrade cost?

The price depends on your service size and the condition of the panel. You can find typical ranges for our area in our panel cost guide.

Related Services

Ready to talk about electrical panel upgrades and replacements?

Call Crescent or request a quote.

Call (509) 903-9411 Request a Quote